Lenovo 70B4, User Manual And Hardware Maintenance Manual

Page: 157 / 246

Before you begin, print all the related instructions or ensure that you can view the PDF version on another
computer for reference.
Notes:
• Depending on the model, your server might look slightly different from the illustrations in this topic.
• Use any documentation that comes with the non-hot-swap hard disk drive and follow those instructions in
addition to the instructions in this topic.
To remove a non-hot-swap hard disk drive, do the following:
1. Remove all media from the drives and turn off all attached devices and the server. Then, disconnect all
power cords from electrical outlets and disconnect all cables that are connected to the server.
2. Use the front door key to unlock the front door, and then use the front door handle 1 to pivot the
front door to the open position.
Figure 85. Opening the front door of the server
3. Remove the server cover. See “Removing the server cover” on page 85.
Chapter 6
.
Installing, removing, or replacing hardware
145