Lenovo 70B4 User Manual And Hardware Maintenance Manual Download Page 135

Page: 135 / 246

Notes:

• If you remove the TMM Premium, the iKVM function for server remote management will be unavailable.

• Use any documentation that comes with the TMM Premium and follow those instructions in addition to

the instructions in this topic.

• Depending on the model, your server might look slightly different from the illustration in this topic.

To remove the TMM Premium, do the following:

1. Remove all media from the drives and turn off all attached devices and the server. Then, disconnect all

power cords from electrical outlets and disconnect all cables that are connected to the server.

2. Remove the server cover. See “Removing the server cover” on page 85.

3. Lay the server on its side for easier operation.

4. Locate the TMM Premium on the system board, and then lift the TMM Premium straight up to remove

it from the connector.

Figure 66. Removing the TMM Premium

5. If you are instructed to return the old TMM Premium, follow all packaging instructions and use any

packaging materials that are supplied to you for shipping.

What to do next:

• To work with another piece of hardware, go to the appropriate section.

• To complete the removal procedure, go to “Completing the parts replacement” on page 205.

Chapter 6

Installing, removing, or replacing hardware

123

Summary of Contents for 70B4























































































































































































































































Search results

Summary of Contents for 70B4

Reviews:

Related manuals for 70B4

Brands by name

Popular brands

Lenovo 70B4, User Manual And Hardware Maintenance Manual

Search results

Summary of Contents for 70B4

Reviews:

Related manuals for 70B4

Brands by name

Popular brands