Lenovo 70B4 User Manual And Hardware Maintenance Manual Download Page 181

Page: 181 / 246

9. Note the orientation of the new microprocessor. Hold the new microprocessor by its edges and align

the notches

on it with the tabs

in the microprocessor socket. Then, carefully lower the new

microprocessor straight down into the microprocessor socket.

Note:

The small triangle

on one corner of the new microprocessor is the microprocessor orientation

indicator. The new microprocessor is in the correct orientation when this indicator faces the beveled
corner

of the microprocessor socket.

Figure 113. Installing the microprocessor

Chapter 6

Installing, removing, or replacing hardware

169

Summary of Contents for 70B4























































































































































































































































Search results

Summary of Contents for 70B4

Reviews:

Related manuals for 70B4

Brands by name

Popular brands

Lenovo 70B4, User Manual And Hardware Maintenance Manual

Search results

Summary of Contents for 70B4

Reviews:

Related manuals for 70B4

Brands by name

Popular brands