manualshive.com logo in svg

Lenovo 70B4, User Manual And Hardware Maintenance Manual

Introducing the Lenovo 70B4, a high-performance device designed to enhance your productivity. Accessing its full potential is made easier with the free User Manual and Hardware Maintenance Manual available for download from manualshive.com. Stay informed, troubleshoot, and optimize your experience with these comprehensive manuals at your fingertips.

Share
Download
background image

insert the

ThinkServer EasyStartup

DVD into the optical drive. The installation packages for the programs

are located in the Utilities and Others folder in the root directory of the DVD. The

ThinkServer EasyStartup

DVD is designed for different types of servers and the Utilities and Others folder might contain additional
installation packages that are not required to be installed on your server.

Configuring the ThinkServer RAID 100 or RAID 300

The ThinkServer RAID 100 or RAID 300 (also known as onboard SATA/SAS software RAID) is integrated in
the PCH on the system board. If you connect the signal cables from the system board to the hard disk drives
or backplane, you can configure RAID for the hard disk drives using the LSI Software RAID Configuration
Utility program, independently of the operating system. The ThinkServer RAID 100 or RAID 300 supports
RAID levels 0, 1, and 10 by default. You also can activate RAID 5 by installing a ThinkServer RAID 100 or
RAID 300 Upgrade Key for Advanced RAID. See “Installing or removing the ThinkServer RAID 100 or RAID
300 upgrade key for Advanced RAID” on page 118.

You can install and use the MegaRAID Storage Manager program to manage the RAID array and RAID
controller in an operating system environment.

Before configuring RAID for your server, observe the following precautions:

• Use hard disk drives that are of the same type (SATA or SAS) and have the same capacity within a

single RAID array.

• The total drive capacity of the primary RAID array is limited to 2 TB.

RAID array status

When you turn on the server, the RAID controller ROM version, the RAID array status, and the list of available
hard disk drives will be displayed during the POST.

The RAID array status can be one of the following:

•

Online

This is the normal status, which indicates that the RAID array is working correctly.

•

Degrade

This status indicates that more than one hard disk drive in the RAID array cannot be synchronized or have
failed. You need to replace the failing hard disk drives and rebuild the data. See “Installing or replacing a
hot-swap hard disk drive” on page 135 and “Rebuilding a physical drive” on page 77.

•

Offline

This status indicates that the RAID array has failed and cannot be rebuilt. You need to create a new RAID
array. See “Creating, adding, or deleting a RAID array” on page 76.

Starting the LSI Software RAID Configuration Utility program

This topic provides instructions on how to start the LSI Software RAID Configuration Utility program.

To start the LSI Software RAID Configuration Utility program, do the following:

1. Turn on the server.

2. During the POST, when you see the message “Press Ctrl-M or Enter to run LSI Software RAID Setup

Utility,” immediately press Ctrl+M to start the LSI Software RAID Configuration Utility program.

LSI Software RAID Configuration Utility program interface

This topic provides information about the menus and items in the LSI Software RAID Configuration Utility
program. Depending on the version of the program, some menu or item information might differ slightly from
the information in this topic.

74

ThinkServer TD340 User Guide and Hardware Maintenance Manual

Summary of Contents for 70B4























































































































































































































































Reviews:

No comments

Related manuals for 70B4

Gateway Profile 6 Hardware Reference Manual preview
Profile 6
Brand: Gateway Pages: 34
Gateway GT5062b Reference Manual preview
GT5062b
Brand: Gateway Pages: 142
Gateway GM5407H Reference Manual preview
GM5407H
Brand: Gateway Pages: 288
Gateway FX6800 Setup Manual preview
FX6800
Brand: Gateway Pages: 2
Gateway DX4200-JB001A Starter Manual preview
DX4200-JB001A
Brand: Gateway Pages: 24
Gateway ALR 8200 User Manual preview
ALR 8200
Brand: Gateway Pages: 52
ZiLOG Z8 Encore! Technical Manual preview
Z8 Encore!
Brand: ZiLOG Pages: 166
Gateway GT5062b User Manual preview
GT5062b
Brand: Gateway Pages: 96
S&T kontron KBox B-201-CFL User Manual preview
kontron KBox B-201-CFL
Brand: S&T Pages: 72
IBM 6862 - PC 300 PL User Manual preview
6862 - PC 300 PL
Brand: IBM Pages: 208
Compaq d260 - Microtower Desktop PC Illustrated Parts Map preview
d260 - Microtower Desktop PC
Brand: Compaq Pages: 1
Black & Decker FSWM1000 Instruction Manual preview
FSWM1000
Brand: Black & Decker Pages: 20
EVOC EIC--2201 Series User Manual preview
EIC--2201 Series
Brand: EVOC Pages: 22
Fanvil i20S User Manual preview
i20S
Brand: Fanvil Pages: 50
Fanvil i12 User Manual preview
i12
Brand: Fanvil Pages: 57
Elite Progres Plus Series Assembly Instructions preview
Progres Plus Series
Brand: Elite Pages: 2
Elite RC-1 Manual preview
RC-1
Brand: Elite Pages: 3
TYAN GA80-B7061 Service Engineer'S Manual preview
GA80-B7061
Brand: TYAN Pages: 167

Brands by name

Popular brands

Load more brands