Lenovo 70B4 User Manual And Hardware Maintenance Manual Download Page 32

Page: 32 / 246

The following illustration shows the location of the IDM and the diagnostic LEDs on the IDM panel in the
front of the server.

Note:

Depending on the model, your server might look slightly different from this illustration.

Figure 5. IDM panel

LED

Status

Description

Action

Solid off

The microprocessors are
operating at a normal
temperature.

Microprocessor

status LED (also known
as CPU error LED)

Solid on (amber)

One or more microprocessors are
overheated.

Check the BMC for errors and
run the diagnostic programs. See
“Using a diagnostic program” on
page 209.

Solid off

The memory modules
are operating at a normal
temperature.

Memory module

status LED

Solid on (amber)

One or more memory modules
are overheated.

Check the BMC for errors and
run the diagnostic programs. See
“Using a diagnostic program” on
page 209.

ThinkServer TD340 User Guide and Hardware Maintenance Manual

Summary of Contents for 70B4























































































































































































































































Search results

Summary of Contents for 70B4

Reviews:

Related manuals for 70B4

Brands by name

Popular brands

Lenovo 70B4, User Manual And Hardware Maintenance Manual

Search results

Summary of Contents for 70B4

Reviews:

Related manuals for 70B4

Brands by name

Popular brands