Lenovo 70B4, User Manual And Hardware Maintenance Manual

Page: 29 / 246

Front panel
This topic provides information to help you locate the control, connectors, and LEDs on the front panel of
the server.
The following illustration shows the control, connectors, and LEDs on the front panel of the server.
Note: Depending on the model, your server might look slightly different from this illustration.
Figure 4. Front panel
1
Power switch with power status LED
5
System status LED
2
Hard disk drive status LED
6
Front USB connector 1
3
Network Interface Controller (NIC) 1 status LED
7
Front USB connector 2
4
NIC 2 status LED
1 Power switch with power status LED
Press the power switch to turn on the server when you finish setting up the server. Hold the power switch
for several seconds to turn off the server if you cannot turn it off from the operating system. See Chapter
4 “Turning on and turning off the server” on page 59. The power status LED helps you to determine the
current power status.
Chapter 3
.
Product overview
17