Lenovo 70B4 User Manual And Hardware Maintenance Manual Download Page 134

Page: 134 / 246

5. Locate the TMM Premium connector on the system board, and then insert the TMM Premium into

the TMM Premium connector.

Note:

Ensure that the TMM Premium is securely seated on the system board.

Figure 65. Installing the TMM Premium

What to do next:

• To work with another piece of hardware, go to the appropriate section.

• To complete the installation, go to “Completing the parts replacement” on page 205. Then,

refer to the

ThinkServer Management Module User Guide

, which is available for download at

http://www.lenovo.com/UserManuals, for more information about server remote management.

Removing the TMM Premium

Attention:

Do not open your server or attempt any repair before reading and understanding “Safety information”

on page iii and “Guidelines” on page 83.

This topic provides instructions on how to remove the TMM Premium if your server has one installed.

Before you begin, print all the related instructions or ensure that you can view the PDF version on another
computer for reference.

122

ThinkServer TD340 User Guide and Hardware Maintenance Manual

Summary of Contents for 70B4























































































































































































































































Search results

Summary of Contents for 70B4

Reviews:

Related manuals for 70B4

Brands by name

Popular brands

Lenovo 70B4, User Manual And Hardware Maintenance Manual

Search results

Summary of Contents for 70B4

Reviews:

Related manuals for 70B4

Brands by name

Popular brands