Lenovo 70B4 User Manual And Hardware Maintenance Manual Download Page 47

Page: 47 / 246

Figure 16. 2.5-inch hot-swap hard disk drive status LEDs

Hard disk drive activity LED

Hard disk drive RAID status LED

Description

Off

The hard disk drive has failed or is
not present.

On, green

Off

The hard disk drive is present but not
in use.

Blinking, green

Off

The hard disk drive is active and data
is being transferred.

On, green

Blinking rapidly (about four flashes
per second), amber

The RAID controller is identifying the
hard disk drive.

On, green

On, amber

The RAID array has failed and cannot
be recovered. You need to recreate a
new array.

Blinking, green

Blinking slowly (about one flash per
second), amber

The hard disk drive is being rebuilt.

RAID card

This topic provides information to help you locate the connectors on a RAID card.

Chapter 3

Product overview

Summary of Contents for 70B4























































































































































































































































Search results

Summary of Contents for 70B4

Reviews:

Related manuals for 70B4

Brands by name

Popular brands

Lenovo 70B4, User Manual And Hardware Maintenance Manual

Search results

Summary of Contents for 70B4

Reviews:

Related manuals for 70B4

Brands by name

Popular brands