Lenovo 70B4 User Manual And Hardware Maintenance Manual Download Page 216

Page: 216 / 246

b. Position the microprocessor socket cover above the microprocessor socket so that the small triangle

on the socket cover faces the small triangle

on the microprocessor retainer. Then, carefully

press the socket cover straight down into the socket until it snaps into position.

Figure 143. Installing the microprocessor socket cover

c. Gently close the microprocessor retainer, press down the small handle, and then push the small

handle inward to lock the retainer into position.

Figure 144. Securing the microprocessor retainer

20. Install all parts that you have removed and connect all cables to the new system board. Refer to the

information that you have recorded and the related topics in Chapter 6 “Installing, removing, or replacing
hardware” on page 83.

21. If you are instructed to return the old system board, follow all packaging instructions and use any

packaging materials that are supplied to you for shipping.

204

ThinkServer TD340 User Guide and Hardware Maintenance Manual

Summary of Contents for 70B4























































































































































































































































Search results

Summary of Contents for 70B4

Reviews:

Related manuals for 70B4

Brands by name

Popular brands

Lenovo 70B4, User Manual And Hardware Maintenance Manual

Search results

Summary of Contents for 70B4

Reviews:

Related manuals for 70B4

Brands by name

Popular brands