Leica TCS SP8 SMD, User Manual

Page: 42 / 270

42
System Overview and Properties
7.5.3 Electrical Specifications
You can find more information on electrical connection requirements in
Chapter 8.4
and in
Chapter 8.5
.
Observe the user manuals for external lasers
Please refer to the information from the documents provided by the laser
manufacturer for the external lasers. Pay particular attention to the laser
manufacturer's notes!
7.6 "Electromagnetic Compatibility"
In regards to emitted interference, this is a class A system (CISPR 11). This system is
suitable for use in buildings that do not include domestic premises and buildings not directly
connected to a low-voltage power supply network that supplies buildings used for domestic
purposes.
The system can cause radio interference in a household environment. In these cases, the
operator may have to take measures to eliminate the interference.
When using internal and external HyDs, it is recommended that the system only be operated
in a controlled electromagnetic environment. This is because the use of cell phones or other
radio transmitting devices such as DECT phones can cause picture interference if used in
the immediate vicinity of the system.
Flexible supply unit Compact supply unit White light laser
Supply voltage 100 V~ to 240 V~ ± 10%, grounded
Power consumption 2x 1600 VA
(Including peripheral
devices connected to
the flexible supply unit's
multiple socket outlet,
see Chapter 8.5 )
700 VA 400 VA
Fuse LS automated process 2x T8AH, 250 V AC LS automated
process for TCS
SP8.
2x T4AH, 250 V AC
for white light
laser
Protection class I
Type of protection Covered design
Overvoltage category II
Frequency 50/60 Hz