Leica TCS SP8 SMD, User Manual

Page: 96 / 270

96
Switching On the System
13.2 Confocal System with Compact Supply Unit (Only with FLIM)
1. If you are using a fluorescence lamp EL6000, switch it on first.
Figure 71: EL6000
2. If you are using a HyD RLD, switch it on at its supply unit. You can find additional
information on the HyD RLD in Chapter 13.3 .
Figure 72: HyD RLD supply unit
3. Switch on the workstation. The operating system starts automatically. Wait until the
startup process has concluded.
4. Switch off the multiple socket outlet on the trolley. Switch on the SMD workstation if it
does not start up automatically.
5. Turn on the microscope by actuating the electronics box toggle switch ( Figure 73,
item 2 ). The microscope is operational once the readiness indicator ( Figure 73, item 1 )
on the toggle switch is lit up.