Kyocera 7135 - Smartphone - CDMA2000 1X, Reference Manual

Page: 28 / 224

20 Kyocera 7135 Smartphone Reference Guide
Adjusting sounds
To silence the ringer
1.
Tap .
2.
Tap to select
Prefs Phone
.
3.
Tap in the upper-right corner and select
Phone Alerts
.
4.
Tap next to
Silence All
.
5.
Tap on an option to select it:
■
Normal Sounds—
The phone rings when you receive a call.
■
Vibrate Only—
The ringer and all alert sounds are turned off.
The phone vibrates when you receive a call.
■
Lights Only—
The ringer and all alert sounds are turned off. The lights on the phone flash
when you receive a call.
To adjust the ringer volume
Press the volume up or volume down buttons on the side of the Kyocera 7135 smartphone to
adjust the volume. You hear a sample of the ringer at each level.
-or-
Refer to the next section to set a volume.
To set sound preferences
1. Tap to view the applications screen.
2.
Tap to open
Prefs Phone.
3.
Tap in the upper-right corner and select
Incoming Calls.
4. Tap beside
Call/Ring Vibe
and select from three options:
Ring Only, Vibrate Only,
or
Vibrate then Ring.
5.
Tap by
Ringer Volume
to select from the options listed.
Your phone will demonstrate the selected volume.
6.
Tap next to
Ringer Type
to select from a variety of ringer tones.
When you select a Ringer Type, your phone will demonstrate
that ringer.
7.
Tap the box next to
Ring by Category
to set specific rings for assigned types of contacts.
8.
Tap the box next to
Roam Ringer
to activate a unique ringer indicating that your phone is
located in a roam area.