manualshive.com logo in svg

Kyocera 7135 - Smartphone - CDMA2000 1X, Reference Manual, Page: 21 / 224

Share
Download
Kyocera 7135 - Smartphone - CDMA2000 1X Reference Manual Download Page 21

Chapter 2 Making and Receiving Calls

13

Making a call from the Address Book

Making a call from the Address Book

You can view the names and numbers in your Address Book and place calls using the 
Address book.

To make a call from the Address book

1.

From the phone screen, press the navigator key down to highlight 

Address Book

.

2.

Press 

 to select 

Address Book

.

3.

Press 

 to select 

View Address Book

.

Note:

 You may also open the address book by pressing 

 

on the keypad.

4.

Press the navigator key down to move through the list.

5.

When the name you want to call is highlighted, do one of the following:

■

If there is only one number for this contact, press 

 to make the call.

■

If there are several numbers for this contact, press the navigator key in to see them all. 
Select the one you want, and then press 

.

6.

When you have finished your call, press 

.

Summary of Contents for 7135 - Smartphone - CDMA2000 1X

































































































































































































































Reviews:

No comments