Kyocera 7135 - Smartphone - CDMA2000 1X Reference Manual Download Page 123

Page: 123 / 224

Chapter 9 Messages

115

Checking your messages

After viewing the message, do one of the following:

■

Tap

Done

to exit the message.

■

Tap

Save

to save the message in your Saved folder.

■

Tap

Erase

to erase the message.

The

Action

menu (bottom right corner of screen) offers additional choices:

The

Outgoing Message

screen is displayed with the address of the sender inserted in

the To field. Enter your message text and tap

Send

Forward

The

Outgoing Message

screen is displayed with the message text in the

Message

field.

Erase

Erases the message.

Save

Saves the message to the Saved folder.

Sender

Displays sender information if available.

Block

Blocks incoming messages from the sender.

Sending a message

From the Phone screen

On the phone screen, press the navigator key

down to highlight

Messages

Press

to select Messages. The Messages screen is displayed.

Continue with

Step 2

in next section.

From the Applications screen

On the Applications screen, tap

Messages

Summary of Contents for 7135 - Smartphone - CDMA2000 1X

































































































































































































































Search results

Summary of Contents for 7135 - Smartphone - CDMA2000 1X

Reviews:

Kyocera 7135 - Smartphone - CDMA2000 1X, Reference Manual, Page: 123 / 224

Search results

Summary of Contents for 7135 - Smartphone - CDMA2000 1X

Reviews: