Konica Minolta CS-7, Operation Manual

Page: 364 / 424

364
8.2 Dialog boxes/balloons and countermeasures
Displayed message Problems/countermeasures
Invalid value. Cannot use "\", "^" or "=" here. Displayed when "\", "^", or "=" is entered.
Do not use "\", "^", or "=".
Is it OK to cancel the registration? Displayed when attempting to cancel the DR Detector registra-
tion to the exposure room.
Press [OK] to erase the registration.
Is it OK to delete? Displayed when characters which have been placed in annota-
tion are selected and [Delete] is pressed.
Press [OK] to delete.
Is it OK to delete all? Displayed when characters which have been placed in annota-
tion are selected and [Delete All] is pressed.
Press [OK] to delete.
Is it OK to delete the active capture conditions? Displayed when attempting to delete unexposed Exam. Tags.
Press [OK] to delete the Exam. Tags.
Is it OK to delete the registered cassette barcode? Displayed when deleting the Exam. Tags with the bar code
registered .
Is it OK to delete the selected queue? Displayed when the [Delete] button is pressed. Press [OK] to
delete the queue .
Is it OK to log off? Displayed when [Log off] in the tool bar area is pressed.
Press [OK] to log off.
It cannot edit because of the waiting for an output .
Please perform edit after waiting till the completion of an output
or deleting output queue .
Displayed when trying to edit combined Exam. Tags while
output is in progress . Wait until output is complete, or delete the
output queue before editing .
It is not uniformly exposed. Confirm that there are no foreign
objects before the AeroDR Detector or check the irradiation field
aperture .
This is displayed when irradiation was not uniform .
Check for foreign objects and problems with the irradiation field
aperture, then perform exposure again.
Less than Minimum Space Required . Please Check Media . This is displayed when the amount of available space on the
media for storing backup data is low .
Prepare new media .
Log Backup Failed due to an error . Displayed when an internal processing error occurs while back-
ing up (saving) the log using the Log management tool or Reject
log tool fails .
Confirm that the designated save location is write-enabled and
try to back up (save) the Log again .
Log delete operation is completed . Displayed when deleting the log using the Log management
tool or Reject log tool is complete .
Press [Yes] to delete the log.
Log has been Saved . Do you want to clear the Log? Displayed when confirming whether to delete the log after back -
ing up (saving) the log using the Log management tool or Reject
log tool is complete .
Press [Yes] to delete the log.
Mammo Exam. Tag is fixed with high resolution. This is displayed when changing the reading resolution to Stan-
dard in the mammogram exposure conditions.
Set the reading resolution to High .
Mandatory Field is not Entered . Perform Not Possible . Displayed when an improper character has been entered .
Press [OK] to close the screen.
Max value of shots has exceeded. Cannot perform the study. Displayed when the total number of exposures in a study se -
lected through multi-study exceeds the max value. Reduce the
number of selected exposures and perform the study again.
Maximum number of preset is configured. Displayed when the number of preset settings exceeds the up -
per limit .
Delete the preset to add more settings .