Konica Minolta CS-7, Operation Manual

Page: 95 / 424

95
Chapter 5
5.2 Exposure procedure with DR Detector (Basic connection)
3
Move the ROI area.
• When any part of the image is clicked, the ROI
area moves to the center of the clicked part .
• The following operations will cancel the ROI
mode .
– Pressing [ROI] again
– Pressing another button
IMPORTANT •••••••••••••••••••••••••••••••••••••
• When ROI area movement is performed after chang-
ing S value/G value, the changed S value/G value is
reset, and the S/G value becomes optimized after ROI
area movement .
•••••••••••••••••••••••••••••••••••••••••••••••••••••
HINT
•••••••••••••••••••••••••••••••••••••
• Perform detailed position change of ROI area on the
viewer screen .
•••••••••••••••••••••••••••••••••••••••••••••••••••••
z
Zooming in and out
Zoom in/out of exposed images is performed with the
following procedure .
1
Select an image to zoom in/out.
• The control panel automatically switches to the
[Image Proc] tab. If it does not switch, select the
[Image Proc] tab manually.
z
Change of ROI area position
Change of ROI area position is performed with the fol-
lowing procedure .
1
Select an image whose ROI area you want
to change .
• The control panel automatically switches to the
[Image Proc] tab. If it does not switch, select the
[Image Proc] tab manually.
2
Press [ROI].
• The ROI area is displayed .