Konica Minolta CS-7, Operation Manual

Page: 71 / 424

71
Chapter 3
3 .7 System monitor screen
IMPORTANT •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
• Switch the wireless communications function from off to on while the DR Detector is in the wired connection condition.
• If the AeroSync button, or initial detection level is set inappropriately, malfunction may be caused by a shock to the DR De-
tector . Make sure values are changed appropriately .
• Be aware that the procedure for exposure must be changed in some cases when the settings are changed for the AeroSync
button, or initial detection level . Be sure to press the AeroSync button after changing the button setting from OFF to ON .
• If the setting for the initial detection level is changed while an examination is in progress, the setting is not applied until the
examination is complete.
• The detection selection processing is a function that reduces malfunctions caused by impacts applied to the DR Detector .
When enabling detection selection processing, an area 10 cm or longer in length in the crosswise direction of the DR Detec-
tor must be irradiated by X-rays . You can enable detection selection processing when the above condition is met .
10cm
10cm
• The settings for the initial detection level and detection algorithm may not need to be configured depending on the type of
DR Detector used .
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••