Konica Minolta CS-7, Operation Manual

Page: 285 / 424

285
7.10 Mammogram exposure
Chapter 7
7
Expose using the registered Mammogra-
phy cassette .
• Make sure the image display areas to be ex -
posed are focused .
• Set up the X-ray device before exposure. Per -
form exposure after checking the exposure set -
tings .
Press the exposure switch
8
Read the Mammography cassette with RE -
GIUS .
• The image read from the barcode on the Mam-
mography cassette will be displayed .
IMPORTANT •••••••••••••••••••••••••••••••••••••
• In the case of X-ray link, make sure exposure settings
are displayed for the image after exposure.
• Confirm that additional information such as markers
and stamps is not superimposed on the breast area .
•••••••••••••••••••••••••••••••••••••••••••••••••••••
HINT •••••••••••••••••••••••••••••••••••••
• Overlay settings (LR, CC, MLO, etc .) are made on the
[Overlay] tab (host or printer). For information on the
overlay setting method, refer to "6 .4 .22 Overlay" .
• If the image needs revision (chest wall blackening
process, etc .) when checking the image by pressing
[Preview] of overlay, adjust the image on the viewer
screen .
•••••••••••••••••••••••••••••••••••••••••••••••••••••
9
Perform the second exposure or more .
• Repeat from step 4 to perform the second expo -
sure or more .
10
Press [ ] for the first image.
11
Press [ ] for the second image .
• The breast position adjustment screen is dis-
played . Two images are displayed on the right
and left, and the vertical position of them is au-
tomatically adjusted .
HINT •••••••••••••••••••••••••••••••••••••
• When the two images are transposed with each other,
press [Swap] to replace them with each other.
•••••••••••••••••••••••••••••••••••••••••••••••••••••
12
Fine-tune the position of the right and left
images if necessary .