Konica Minolta CS-7, Operation Manual

Page: 99 / 424

99
Chapter 5
5.3 Exposure with DR Detector (Aero Sync mode) 5.3 Exposure with DR Detector (Aero Sync mode)
5 .3 .1 Exposure flow
The following describes the basic flow of exposure using the DR Detector. See each item for detailed procedures.
5.3.5 Exposure ……………………………… (4)
5 .3 .4 Manual body part selection ………… (3)
5.3.3 Selection of examination …… (2)
5 .3 .2 New registration of patient information … (1)
5 .3 .6 Image adjustment on the exposure screen … (5)
5.3.7 Examination completion and output … (6)
Number Task
(1) Perform a new patient registration in the patient registration screen .
(2) Select the examination target in the list screen.
(3) Set the exposure body part and exposure condition.
(4) Perform exposure.
(5) Adjust the exposed images after exposure. Change the S value/G value, move the ROI area, etc.
(6)
When all exposures are finished, the examination is completed. Image is simultaneously and automatically output upon
examination completion. (depending on the settings)