Konica Minolta CS-7, Operation Manual

Page: 254 / 424

254
7.6 Auto stitching exposure with AeroDR Detector
2
Press [OFF] or the button of the output
size to be changed on the Split Output
Size dialog box.
• The output size is changed .
HINT •••••••••••••••••••••••••••••••••••••
• When output of split images is enabled, a frame ap-
pears on the image to indicate the area of the split im-
age that will be output .
Split output frame
Trimming frame
• The size of the trimming frame changes in accordance
with changes to the size of the image frame so that
images are automatically split into the selected section
size. Images can be split into a maximum of 3 sec -
tions .
• If the split image is smaller than the trimming region,
the entire combined image may not completely fit
within the selected region .
• If the configuration of the split images results in one
image, the split processing is not applied, and the split
output frame does not appear .
•••••••••••••••••••••••••••••••••••••••••••••••••••••
7 .6 .2 Exposure
The auto stitching exposure method using DR Detec -
tor is as follows .
1
Perform exposure preparations for Aero-
DR Stitching System.
• For details, refer to the "AeroDR Stitching Sys-
tem Manual" .
2
After transitioning from the initial screen
to the exposure body part selection
screen, select the Exam . Tag for stitching
exposure .
• Select 2 or 3 Exam. Tags for stitching exposure.
• The selected Exam. Tags are displayed on the
Exam. Tags display area.
HINT •••••••••••••••••••••••••••••••••••••
• It is also possible to register multiple exposure body
parts in 1 Exam. Tag.
•••••••••••••••••••••••••••••••••••••••••••••••••••••