Konica Minolta CS-7, Operation Manual

Page: 13 / 424

13
Introduction
Terms Description
RIS
Abbreviation for Radiology Information System
A system to manage reservation and result of examinations and treatment that use radiol -
ogy equipment
Host A server to save image information
X-ray device
An X-ray exposure device constructed of an X-ray generator device, an operation panel,
and so on
HS processing
Image processing to reduce noise
Used to reduce the noise while maintaining the definition of an image.
F processing
Image processing for adjusting the sharpness of an image
Used to maintain the sharpness of each image depending on the exposure body part.
E processing
Image processing for compressing the dynamic range
Depending on the body part, used to provide a suitable diagnostic image even with high
contrast images .
IG
An acronym for Intelligent-Grid .
This is a function that corrects scattered X-ray radiation .
Exposure body part This is the exposure body part, such as head, neck, and chest.
Exam. Tag
A button that has registered exposed body parts, size, direction, etc. It is positioned on the
body part selection screen .
Exposure condition
Indicates conditions relating to exposure in general such as exposure device, exposure
method, exposure setting, and positioning.
Exposure setting
Indicates the tube voltage, X-ray tube current, exposure time, etc. displayed on the console
of the X-ray device .
Wired cable Collective term indicating I/F Cable and AeroDR UF Cable .
Aero Sync This is a mode in which exposure is performed without being synchronized with the X-ray device.
Stitching holder
Collective term indicating the holder used for One Shot stitching exposure. The holder can
load two or three DR Detectors .
Upper, Middle, Lower
The positions of slots containing the stitching holder DR Detectors are labeled as upper,
middle, and lower .
Upper
The triangle mark is on top .
Middle
Lower