Konica Minolta CS-7, Operation Manual

Page: 255 / 424

255
7.6 Auto stitching exposure with AeroDR Detector
Chapter 7
3
Press [Perform] .
• The exposure screen is displayed.
HINT •••••••••••••••••••••••••••••••••••••
• Display of the device icon and message changes ac-
cording to the device status . The meaning of the sta-
tuses to be displayed are listed below .
"Please do the height detection ."
AeroDR Stitching Unit is in preparation .
"Please detect radiation field."
Condition of undetected exposure. Detect
exposure field detection.
"Please check a panel"
DR Detector is not set (ready) for modality
to be used for exposure. Set (prepare) the
DR Detector .
•••••••••••••••••••••••••••••••••••••••••••••••••••••
4
Patients are led before the AeroDR Stitch -
ing Unit and the X-ray exposure range is
set .
IMPORTANT •••••••••••••••••••••••••••••••••••••
• If Exam. Tag and exposure field confirmation results
do not match, the following action is performed .
–
If exposure field confirmation results are less
than the Exam. Tag, the confirmation screen is
displayed. The Exam. Tag is maintained as is and
exposure is enabled.
– If exposure field confirmation results exceed the
Exam. Tag, an error is displayed. Either reset the
exposure field or add an Exam. Tag on the body
part selection screen .
•••••••••••••••••••••••••••••••••••••••••••••••••••••
5
The exposure ready LED (blue) of the
AeroDR Stitching Unit lights to let you
know exposure is enabled .
6
Exposes the first.
• Set up the X-ray device before exposure. Per -
form exposure after checking the exposure set -
tings .
Press the exposure switch
• Exposed preview image is displayed.
IMPORTANT
•••••••••••••••••••••••••••••••••••••
• Make sure the focus matches stitching Exam. Tags.
• Always ensure the exposure ready LED (blue) of the
AeroDR Stitching Unit is lit before performing an expo
-
sure. Additionally, do not press the first stage of the ex -
posure switch until the exposure ready LED (blue) is lit.
•••••••••••••••••••••••••••••••••••••••••••••••••••••