Konica Minolta CS-7, Operation Manual

Page: 119 / 424

119
Chapter 5
5.4 Exposure with CR cassette
5 .4 .7 Examination completion
and output
When all exposures are finished, end the examination
and perform output .
1
Press [ ] .
• When the examination is finished, exposed im -
ages are batch output to a preset output desti-
nation .
• The display returns to the initial screen .
IMPORTANT •••••••••••••••••••••••••••••••••••••
• Always check the X-ray irradiation results before fin -
ishing the examination.
• When the examination ends and no exposure images
exist, the examination itself is deleted. At this time, a
confirmation screen is displayed on whether to delete
the examination.
→ Press [OK] to delete the examination itself.
→ Press [Cancel] to return to the previous screen.
* A message "No images are captured . Cannot com-
plete study ." may be displayed depending on the
settings. In such cases, press the [Pause] button
or [Termination] button. Either of the two buttons is
displayed depending on the settings .
•••••••••••••••••••••••••••••••••••••••••••••••••••••
HINT
•••••••••••••••••••••••••••••••••••••
• If there is an unexposed image, a confirmation screen
is displayed .
→ Press [OK] to complete the examination by delet -
ing data for the unexposed portion and display the
initial screen .
→ Press [Cancel] to return to the previous screen.
• When outputting to a host, the output destination can
be switched between the predetermined host and a
backup host . Furthermore, when the output conditions
are different for each backup destination, recalculation
of output size is performed .
• Depending on the setting at the time of installation,
on the edge of the output film (the output image when
output to a host) a mark is added showing whether the
image is flipped or not.
: Flipped
: Not flipped
•••••••••••••••••••••••••••••••••••••••••••••••••••••