Konica Minolta CS-7, Operation Manual

Page: 180 / 424

180
6 .7 Functions of the viewer screen
Icon Functions
Switch between [ON] and
[OFF] of the masking area
display .
Specify a masking area by
automatically recognizing the
effective image area.
Press any 2 points to specify a
square with a diagonal line that
connects the 2 points as the
size of the masking area .
Press any 4 points or more to
specify a polygonal masking
area .
Press any 3 points to specify a
round masking area .
Switch between [ON] and
[OFF] of the chest wall black -
ening process .
Resets operations performed
in the tab .
This is displayed in the specified
masking area . Drag to adjust
the size of the masking area .
Move the masking frame up,
down, left and right .
3
Press [Return] after change.
• Returns to the exposure screen.
HINT •••••••••••••••••••••••••••••••••••••
• The masking area can be changed by directly drag-
ging the square mark on the frame border of the
masking area or its perimeter .
• After specifying a masking area, drag any point of the
masking area to change the shape of the masking
area .
• The results of masking recognition outside the expo -
sure field can be confirmed on the viewer screen or
the image display area of the exposure screen.
• Depending on the image information status, automatic
recognition of the exposure field area may not be car -
ried out properly . In this case, please change the ef-
fective image area manually .
• The accuracy of masking can be increased by paying
attention to the following at exposure.
– Place protective equipment as parallel to the edge
of the exposure field as possible or place it so it
does not overlap the exposure field edge.
– Make sure that objects (clothes or subject area
other than the target) other than the target body
part for exposure are not included in the image.
– Place the exposure target body part at the center
of the exposure field as much as possible.
– When split exposure is performed, provide an inter -
val of at least 1cm between exposure fields before
exposure.
• When the fractional masking function is used on
REGIUS SIGMA/SIGMA2, the masking area may oc-
casionally be moved to the inside of the image .
•••••••••••••••••••••••••••••••••••••••••••••••••••••