Konica Minolta CS-7, Operation Manual

Page: 219 / 424

219
7.3 Exposure with AeroDR Portable UF Unit
Chapter 7
z
Detailed description of tool bar
The display of following buttons in the tool bar area changes depending on the status of communication with the
host .
(2)
(1)
Number Name
Button
display
State of the network and
connected devices
Precautionary items
(1) System button
(Gray)
The network is disconnected or the
output control of all RIS/HOST has
been turned [OFF] manually. It is
possible to continue exposures, but
the data is not sent to RIS/HOST,
it is stored in this device as data
waiting to be sent .
• After a study is completed, connect to the net-
work, and send data waiting to be sent (it is sent
automatically by connecting to the network) .
(Blue)
The network is connected and
there is no data waiting to be sent .
• The network can be disconnected and the IP ad-
dress can be switched .
• Sometimes a maximum 10 seconds elapses
before the state of the button changes . When
disconnecting the network and switching the IP
address, stand by 10 seconds, and make sure
that no white point is rotating around the button .
(Blue: rotating
white point)
The network is connected and
there is data waiting to be sent .
• Do not disconnect the network or switch the IP
address .
• When data waiting to be sent is in a device
whose output is [ON], a white point is displayed
rotating around the button, and is not displayed
when the output is [OFF].
(Red)
A network connection error or
data transmission error occurs in
a connected device such as RIS/
HOST in a state connected to the
network, but without data waiting to
be sent .
Exposure can be continued but
there will be a data transmission
error .
• The network can be disconnected and the IP ad-
dress can be switched .
• Sometimes a maximum 10 seconds elapses
before the state of the button changes . When
disconnecting the network and switching the IP
address, stand by 10 seconds, and make sure
that no white point is rotating around the button .
• A device with a network connection error cannot
send until the error is cleared . After the error is
cleared, turn [OFF]/[ON] the output.
(Red: rotating
white point)
A network connection error or
data transmission error occurs in
a connected device such as RIS/
HOST in a state connected to the
network, and with data waiting to
be sent .
Exposure can be continued but
there will be a data transmission
error .
• Do not disconnect the network or switch the IP
address .
• When data waiting to be sent is in a device
whose output is [ON], a white point is displayed
rotating around the button, and is not displayed
when the output is [OFF].
• A device with a network connection error cannot
send until the error is cleared . After the error is
cleared, turn [OFF]/[ON] the output.
(2)
Display/hide
button
Switches between display and hide of the tool bar .
When the tool bar is hidden, the state of the network and connected devices is shown instead of the
system button .