Konica Minolta CS-7, Operation Manual

Page: 10 / 424

10
Introduction
The CS-7 is a software program for installation on a PC. It performs image processing of X-ray images received from
an AeroDR SYSTEM or REGIUS system.
The CS-7 adds patient data received from RIS etc. and sends diagnosis images to PACS etc. Furthermore, the CS-7
can send requests for exposure conditions to the X-ray device and receive irradiation results.
This operation manual describes instructions on the basic functions for operation of this device. Those operating this
device for the first time should read this manual beforehand.
Also, store this manual close to this device after reading it through, so it can be used as a guide to allow optimum
operating conditions.
*
If the pages of the operation manual are smudged and illegible, replace it with a new one. (There is a fee
for this service.)
IMPORTANT •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
• For United States of America, this device is not intended to use for Mammography.
• One Shot stitching exposure function can only be used in some countries.
– This function cannot be used in the United States or Canada.
– This function cannot be used in the EU, EFTA member countries, Switzerland or Turkey.
• In this manual, "this device" refers to a collective term indicating CS-7 software and PC with the software installed.
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
Summary of usability specifications (for IEC/EN 62366)
(1) Medical purposes
• Provision of disease and injury diagnostic images.
(2) Patient groups
• No patient population exists who uses or is in contact with the device.
• Patient population for the X-ray images read is not specified.
(3) Parts of body or organizations to which the device is mounted or that interact with the device
• No appropriate points. (Device does not come in contact with the patient.)
(4) Operating principle
• This device CS-7 is a software program for installation and use in commercially available PCs.
Commercially available PCs consist of a PC main body and an LCD monitor. This device receives
X-ray image information from the reader device (REGIUS series, DR Detector) and connects it with
patient information, which will be output after processing into diagnosable images by an operator.
(5) Significant physical characteristics
• Refer to "12.1 Specifications".
(6) Significant performance characteristics
• Refer to "12.1 Specifications".
(7) User of this device
• No special training is required to use this device. The intended users of this device are as follows.
– A professional in good health with specialist knowledge/qualifications who has fully understood the
content of this document. (Such as a doctor or radiological technologist)