Konica Minolta CS-7, Operation Manual

Page: 101 / 424

101
Chapter 5
5.3 Exposure with DR Detector (Aero Sync mode)
5 .3 .3 Selection of examination
When the examination is registered, it can be se -
lected on the list screen . Select a tab other than the
[PatientReg.] tab on the initial screen to display the list
screen .
1
Select the examination target .
• Focus is set on the examination.
2
Press [Perform] .
• The exposure screen or the body part selection
screen is displayed
.
HINT
•••••••••••••••••••••••••••••••••••••
• Before selecting the examination, press [Refresh],
check if the list is the newest version available and
then select the examination.
• The exposure screen or the body part selection screen
can be displayed by double-clicking the examination
target .
• If Patient ID is read by a barcode reader, examination
target can be selected . You can also transition to the
exposure screen at the same time the barcode is read,
depending on the setting .
•••••••••••••••••••••••••••••••••••••••••••••••••••••
5 .3 .4 Manual body part
selection
When making advanced settings of exposure body
part and exposure method for each exposure, select
body part manually with the following procedure .
1
Select the tab .
• Linking to the selected tab, the exposure body
part available with the tab are displayed auto-
matically .
2
Select the exposure body part .
• The Exam. Tags corresponding to the selected
exposure body part will be displayed.
3
Select an Exam . Tag .