Konica Minolta CS-7, Operation Manual

Page: 299 / 424

299
7 .12 Multi-study
Chapter 7
7 .12 .4 Additional exposure in
the multi-study
The following describes how to add exposures to the
examination item.
IMPORTANT •••••••••••••••••••••••••••••••••••••
• The maximum number of exposures that can be ac -
quired, including examinations which have already
been started with exposed images, is 512. If the total
number of exposures surpasses 512, an error message
is displayed .
•••••••••••••••••••••••••••••••••••••••••••••••••••••
1
Press [Add Study] on the exposure screen
([Study List] tab screen).
• The Body part selection screen is displayed .
2
Select the body part targeted for exposure .
• For the body part selection procedure, refer to
"5 .2 .4 Manual body part selection" .
HINT
•••••••••••••••••••••••••••••••••••••
• You can issue the accession number by pressing [Is -
sue].
•••••••••••••••••••••••••••••••••••••••••••••••••••••
10
Press the second examination .
• When there are two or more exposure items,
press the intended examination and proceed
with the exposure using the same procedure.
• Exposure screen ([Exam.Tag] tab screen) is dis -
played .
• Continue with your exposure using the proce -
dures described in Steps 5 to 8 .
11
Once all the examinations are finished,
press [ ] .
• The display returns to the initial screen .
HINT •••••••••••••••••••••••••••••••••••••
• Exposures can be added or deleted even after switch -
ing to the body part selection screen .
• In case of the automatic 1×1 display screen, next ex -
posure can be displayed by pressing [NEXT] displayed
in the Exam. Tags display area after completing the
exposure of 1 examination.
•••••••••••••••••••••••••••••••••••••••••••••••••••••