Konica Minolta CS-7, Operation Manual

Page: 116 / 424

116
5.4 Exposure with CR cassette
HINT •••••••••••••••••••••••••••••••••••••
• The S value and G value are automatically adjusted to
the appropriate values at the time of exposure. Adjust
them manually as required .
• Change of S value/G value can also be performed on
the viewer screen . After selection of the image for im-
age adjustment, press the image once more to switch
to the viewer screen . When more advanced image
adjustment is required, perform image adjustment on
the viewer screen where larger images are displayed .
• Dragging the control panel slider or pressing [ ]
increases or decreases the S value/G value in mul-
tiples of the preset value . In addition, when you press
the [S/G] button on the control panel, the S value/G
value can be adjusted by dragging the image .
• Use the user tool to set the drag operation to in-
crease or decrease the S/G values and specify the
degree of change that can be obtained from [ ].
You can also select the setting so that the S/G values
can be adjusted by simply dragging the image or drag-
ging it using both mouse buttons without pressing the
[S/G] button.
•••••••••••••••••••••••••••••••••••••••••••••••••••••
z
Change of parameters
Change of the parameters is performed with the following
procedure .
1
Select an image whose parameters you
want to change .
• The control panel automatically switches to the
[Image Proc] tab. If it does not switch, select the
[Image Proc] tab manually.
2
Press [E] or [F] you want to change .
• Images that were automatically altered by the E
process or F process are displayed .
• When [E] or [F] is pressed again, the original im -
ages are displayed .
IMPORTANT
•••••••••••••••••••••••••••••••••••••
• In the case of a pneumoconiosis examination, a
warning message is displayed when parameters are
changed .
•••••••••••••••••••••••••••••••••••••••••••••••••••••
HINT •••••••••••••••••••••••••••••••••••••
• The parameter options available on the exposure
screen are only ON and OFF . Perform detailed adjust-
ments on the viewer screen .
•••••••••••••••••••••••••••••••••••••••••••••••••••••