Konica Minolta CS-7, Operation Manual

Page: 105 / 424

105
Chapter 5
5.3 Exposure with DR Detector (Aero Sync mode)
5 .3 .6 Image adjustment on
the exposure screen
Performs adjustment of exposed images. Basic image
adjustments such as S value/G value, position of ROI
area, etc. can be made on the exposure screen.
z
Change of S value/G value
Change of S value/G value is performed with the fol-
lowing procedure .
1
Select the image for image adjustment .
• The control panel automatically switches to the
[Image Proc] tab. If it does not switch, select the
[Image Proc] tab manually.
2
Adjust the image .
• Pressing [ ] increases or decreases the
value step by step .
HINT •••••••••••••••••••••••••••••••••••••
• The S value and G value are automatically adjusted to
the appropriate values at the time of exposure. Adjust
them manually as required .
• Change of S value/G value can also be performed on the viewer
screen . After selection of the image for image adjustment, press
the image once more to switch to the viewer screen . When more
advanced image adjustment is required, perform image adjust-
ment on the viewer screen where larger images are displayed .
• Dragging the control panel slider or pressing [ ] increases
or decreases the S value/G value in multiples of the preset value .
In addition, when you press the [S/G] button on the control panel,
the S value/G value can be adjusted by dragging the image .
• Use the user tool to set the drag operation to in-
crease or decrease the S/G values and specify the
degree of change that can be obtained from [ ].
You can also select the setting so that the S/G values can
be adjusted by simply dragging the image or dragging it us-
ing both mouse buttons without pressing the [S/G] button.
•••••••••••••••••••••••••••••••••••••••••••••••••••••
z
Change of parameters
Change of the parameters is performed with the following
procedure .
1
Select an image whose parameters you
want to change .
• The control panel automatically switches to the
[Image Proc] tab. If it does not switch, select the
[Image Proc] tab manually.
2
Press [E] or [F] you want to change .