Konica Minolta CS-7, Operation Manual

Page: 122 / 424

122
6 .1 Functions of the patient registration screen
6 .1 .1 Search registration
You can search for patient information in the patient
database of this device or a higher system and then
register it .
1
Input patient name, ID, etc .
• Search results are displayed .
2
Press [Perform] .
• Registration is performed in the patient data-
base of this device, and the exposure screen or
the body part selection screen is displayed .
IMPORTANT •••••••••••••••••••••••••••••••••••••
• Items that can be searched are "Patient ID" and "Pa-
tient Name" .
• When searched with "Patient ID", only completely
matching patient IDs can be searched, and when
searched with "Patient Name", partially matching
names can also be searched .
• Search will be performed when the cursor moves from
items that can be searched, or [Search] is pressed.
• A search is performed once for each patient data input .
When running the search again, do so after clearing
the patient data being input by pressing [Clear].
•••••••••••••••••••••••••••••••••••••••••••••••••••••
HINT •••••••••••••••••••••••••••••••••••••
• Reading patient information by barcode reader after
focusing on the patient ID enables you to display the
information for that patient . You can also transition to
the exposure screen at the same time the barcode is
read, depending on the setting .
• When there are multiple search results, a list of exami -
nation results is displayed . Select the target search
from the list and press [OK] to register the examina -
tion. Press [Patient Search] to display the search
result of the selected examination. Pressing [Cancel]
returns to the previous screen .
• When searching a higher system, examination results
can also be acquired, depending on the settings se-
lected .
• When examination data is acquired, the correspond -
ing examination is displayed.
•••••••••••••••••••••••••••••••••••••••••••••••••••••