Konica Minolta CS-7, Operation Manual

Page: 118 / 424

118
5.4 Exposure with CR cassette
HINT •••••••••••••••••••••••••••••••••••••
• When a multi-touch monitor is used, zoom in/out can
be performed with the following operations . In this case
[ZOOM+] or [ZOOM-] do not need to be pressed.
Zoom in
Simultaneously press 2 points with the thumb and in-
dex finger and spread the 2 points (spread the finger -
tips) to zoom in on the image .
Zoom out
Simultaneously press 2 points with the thumb and
index finger and move to close the 2 points (close the
fingertips) to zoom out on the image.
• You can also zoom in or out from/to an image by rotat-
ing the mouse wheel up and down on the focused im-
age .
• Use the user tool to set the amount of change associ-
ated with rotating the mouse wheel .
•••••••••••••••••••••••••••••••••••••••••••••••••••••
2
Press [ZOOM+] or [ZOOM-] .
3
Press any part of the image .
• Zooming in/out is displayed, centering on the
clicked part .
• Every time you press a part of the image, the
image is gradually zoomed in/out .
• If you focus on another image or perform any
other operations, the image will return to its
original size .
IMPORTANT •••••••••••••••••••••••••••••••••••••
• Effects of resizing are not reflected at the time of out -
put .
•••••••••••••••••••••••••••••••••••••••••••••••••••••