Konica Minolta CS-7, Operation Manual

Page: 24 / 424

24
1 .2 Safety precautions
1 .2 .4 Precautions regarding care
and maintenance of this device
WARNING
• Do not remove the lithium batteries .
•
Turn the power off and remove the power plug from
the wall outlet .
CAUTION
• Perform the maintenance and inspection periodi-
cally . Also, contact Konica Minolta technical repre-
sentatives for cleaning of the inside .
• Immediately after turning the power off, be careful
of hot components inside this device .
• Install the power cable, interface cable, etc .
securely .
• Do not rub or strike this device with hard objects as
it will cause damage .
1 .2 .5 Precautions regarding
CD/DVD use
WARNING
• The optical head of the CD/DVD device discharges
a laser, so take care not to look in the object lens of
the optical head .
CAUTION
• Take the following precautions to prevent reading
errors etc .
– Do not subject to impact .
– Do not touch disk surfaces .
– Place in cases when storing .
– Do not place in locations with a lot of dust .
– Do not place in locations with high temperature
and high humidity .
– Do not place in direct sunlight .
• Attach labels to CD/DVD surfaces and cases so
that the recorded content can be identified.
• The types of media supported by this device are
CD-R and DVD-R only . Also, please note that it is
possible that when saving on media other than the
following, writing errors or reading errors may oc-
cur . Please be forewarned .
– TDK Co . CD-R 1-48 speed supported <for data>
– Mitsubishi Kagaku Media Co . CD-R 1-48 speed
supported <for data>
– Mitsubishi Kagaku Media Co . DVD-R 1-16
speed supported <for data>
• If dust adheres to the object lens of the optical
head in the CD/DVD drive, it is possible that writ-
ing errors and reading errors may occur . In such
case, remove the dust with a commercial DVD lens
cleaner .