Konica Minolta CS-7, Operation Manual

Page: 107 / 424

107
Chapter 5
5.3 Exposure with DR Detector (Aero Sync mode)
HINT •••••••••••••••••••••••••••••••••••••
• Perform detailed position change of ROI area on the
viewer screen .
•••••••••••••••••••••••••••••••••••••••••••••••••••••
z
Zooming in and out
Zoom in/out of exposed images is performed with the
following procedure .
1
Select an image to zoom in/out.
• The control panel automatically switches to the
[Image Proc] tab. If it does not switch, select the
[Image Proc] tab manually.
2
Press [ZOOM+] or [ZOOM-] .
3
Press any part of the image .
• Zooming in/out is displayed, centering on the
clicked part .
• Every time you press a part of the image, the
image is gradually zoomed in/out .
• If you focus on another image or perform any
other operations, the image will return to its
original size .
IMPORTANT
•••••••••••••••••••••••••••••••••••••
• Effects of resizing are not reflected at the time of out -
put .
•••••••••••••••••••••••••••••••••••••••••••••••••••••
HINT •••••••••••••••••••••••••••••••••••••
• When a multi-touch monitor is used, zoom in/out can
be performed with the following operations . In this case
[ZOOM+] or [ZOOM-] do not need to be pressed.
Zoom in
Simultaneously press 2 points with the thumb and in-
dex finger and spread the 2 points (spread the finger -
tips) to zoom in on the image .
Zoom out
Simultaneously press 2 points with the thumb and
index finger and move to close the 2 points (close the
fingertips) to zoom out on the image.
• You can also zoom in or out from/to an image by rotating
the mouse wheel up and down on the focused image .
• Use the user tool to set the amount of change associ-
ated with rotating the mouse wheel .
•••••••••••••••••••••••••••••••••••••••••••••••••••••