Konica Minolta CS-7 Operation Manual Download Page 11

Page: 11 / 424

Introduction

Disclaimer

(1) This manual may not be reproduced in whole or in part without the permission of Konica Minolta, Inc.

(2) The contents of this manual may be subject to change without prior notice.

(3) Konica Minolta, Inc. is not responsible for any claims made for malfunction or damage caused by installation,

relocation, modification, maintenance, and repair made by anyone except Konica Minolta and contractors

designated by Konica Minolta.

(4) Konica Minolta, Inc. is not responsible for any claims made for malfunction or damage to Konica Minolta

products, caused by third-party products not installed by Konica Minolta.

(5) Konica Minolta, Inc. is not responsible for any claims made for malfunction or damage caused by maintenance

or repair using maintenance parts other than those specified by Konica Minolta.

(6) Konica Minolta, Inc. is not responsible for any claims made for malfunction or damage caused by not observing

the precautions and operation methods described in the operation manual.

(7) Konica Minolta, Inc. is not responsible for any claims made for malfunction or damage caused by the

environment, such as power source and installation environment, that is described in the Installation

Requirement or operation manual, that is not suitable for the installation requirements.

(8) Konica Minolta, Inc. is not responsible for any claims for malfunction or damage caused by acts of nature such

as fires, earthquakes, floods, or lightning strikes.

(9) Konica Minolta, Inc. is not responsible for any claims for malfunction or damage caused by using this device for

any purpose other than that specified for this device.

(10) Diagnostic and treatment action is performed under the responsibility of the physician(s). Konica Minolta, Inc. is

not responsible for any diagnostic/treatment conditions or diagnostic/treatment results.

(11) Konica Minolta, Inc. is unable to assume any liability relating to the following events arising due to systems

infected by computer viruses, worms and other malicious software potentially harmful to computers (hereunder

referred to as "malwares"):

The erasure, corruption, or unwanted disclosure of data stored within this device, including personal and
sensitive patient information.

Malfunction of the device or accidents occurring as a result of the malfunction of the device

Infection of other products upon connection with the device, or damages arising therefrom.

Trademark

Company names and product names in this manual are trademarks or registered trademarks of their respective own-

ers.

Microsoft and Windows are registered trademarks or trademarks of U.S. Microsoft Corporation in the U.S. and other

countries.

Windows 7 is an abbreviation for Microsoft Windows 7 operating system Professional Edition.

Windows 10 is an abbreviation for Microsoft Windows 10 Enterprise 2015 LTSB.

Please note that ©, ® and ™ marks are omitted hereafter.

Option/license

For certain functions of this device, separate options and licenses are needed. For details regarding options and li-

censes, contact Konica Minolta service representatives.

Summary of Contents for CS-7









































































































































































































































































































































































































































Search results

Summary of Contents for CS-7

Reviews:

Related manuals for CS-7

Brands by name

Popular brands

Konica Minolta CS-7, Operation Manual

Search results

Summary of Contents for CS-7

Reviews:

Related manuals for CS-7

Brands by name

Popular brands