A-61635 December 2010
4-89
•
Set image address on scanner start
: automatically resynchronizes the
scanner image address with the current scan batch in Capture Pro Software
every time the scanner is started. The image address value is set to what
the image address should be for the next scanned page. This option is only
available when
Set image address on new batch
is enabled.
When the scanner image address is resynchronized, the image address
fields will be set to the following:
-
Fixed field:
will not change from the current scanner value.
-
Level 3
: the batch number portion of the
Kodak
Capture Pro Software
batch name.
-
Level 2
: the current Capture Pro Software document number.
-
Level 1
: the number of pages in the current document if the image
address format is Level 2 or Level 3. Number of pages in the current
do 1 if the image address format is Level 1.
NOTE: When dual-stream scanning,
Set image address at scanner
start
is not recommended. This is because the number of pages
in the current document is not correctly maintained by Capture
Pro Software when dual-stream scanning. As a result, the Level 1
portion of the image address can easily get out of sync.
Fixed field value
— this is a static field containing ASCII text that does not
increment or change during scanning. Enter the text in the field or click
Setup
,
which displays the Fixed Field Value Configuration dialog box.
OK
— saves your settings and closes the Job Setup dialog box.
