A-61635 December 2010
4-81
Split image if width is between
— use the two drop-down lists to select a
range of widths for the page or image. If the page width falls within this range,
it will be split. If either the front or back side falls outside the range, neither side
will be split.
Front
and/or
Back
— enable this checkbox for
Front
and/or
Back
to activate
the split. A graphic will be displayed showing your selection. For example, if
you enable both checkboxes, the two book icons will appear with a red "X" on
each page:
NOTE: When using a simplex-only scanner, selecting both
Front
and
Back
will result in no split. Select
Front
only to cause a split.
Output order
— the page order will be displayed in this field. Click on each
image segment in the order you want the images to be output. As you click on
an image segment, the red "X" disappears.
Any image segment that is still marked with a red "X" will be deleted and not
sent to output. This option might be useful for the last page of a pamphlet that
is always blank.
Reset Order
— any order that you originally specified will be deleted and you
can reorder your images.
