A-61635 December 2010
4-3
The Job Setup dialog
box
The following information is common to all tabs on the Job Setup dialog box:
Job name
— select a job setup name from the drop-down list.
The Job Setup dialog box has three tabs:
Capture
,
Index
, and
Output
.
Detailed information on how to use these tabs can be found in the following
sections.
• The
Capture
tab allows you to make General, Batch, Bar Code & OCR,
Separation and Scanner settings.
- General settings — define the way images will be stored after scanning.
- Batch settings — select the batch settings for the job setup and put
limits on the number of batch documents and pages.
- Bar Code & OCR settings — create and modify bar code or OCR zones
and set them up for use.
- Separation settings — set up separations by count, blank page, bar
code zone, OCR zone, or patch code.
- Scanner settings — create settings for image addressing and printing
on scanners with those capabilities. Scanner settings such as image
address, printer, and patch settings should always be done in Job Setup
and not in Page Setup. Conflicting settings will default to the Job Setup
settings.
• The
Index
tab allows you to define index fields at the batch and document
levels. The
Database Lookup
tab allows you to specify the data source,
define how the lookup is performed and what data is used to populate index
fields or validate the contents of index fields.
• The
Output
tab allows you to select the System Output and Advanced
Processing options for the job setup.
