A-61635 December 2010
5-3
What to do if patch code is detected
— select one of these options:
•
Batch separation
: creates a new batch with a patch code.
- Patch 3 is normally used to create a new batch.
- Typically the page containing a patch code for batch separation should not
have any content. Therefore, the software discards the patch code page;
the next page scanned becomes the first page of the first document in the
batch.
•
Document separation
: creates a new document with a patch code.
- Patch 2 is normally used to create a new document and keep the image of
the page containing the patch code.
- Patch T is normally used to create a new document and delete the image
of the page containing the patch code.
•
Create attachment
: creates an attachment with a patch code.
•
Delete page:
deletes the page containing the patch code that started the
new document or attachment. This option is important when you use inserts
used for document separation purposes that do not contain any other
information.
•
Rotate document based on patch
: rotates the image containing the patch
code so the patch code is located horizontally on top of the page. All images
in the document will be rotated. This option only works when the
Alternatively search on 180° rotated images
option is enabled.
- The
Rotate document based on patch
option does not work when the
patch code separator page is discarded.
OK
— closes the dialog box and saves your settings.
Creating an attachment
with a patch code
1. Select
File>Job Setup.
The Job Setup dialog box will be displayed.
2. Select the job from the
Job Name
drop-down list that requires patch code
separation.
3. Open the Capture tab and select
Separation>Patch Code
.
4. Select the patch type that you want to define:
Patch 2, Patch 3,
or
Patch
T
. The Patch Code window will be displayed.
5. Click
Detect Patch
.
6. Under
What to do if a patch code is selected
, check the
Create
Attachment
.
7. Check all other desired options in the Patch Code window.
8. Click
OK
.
