6-2
A-61635 December 2010
Overview
To use bar codes or OCR for separation or indexing in your job setup, you
must do the following:
• Select the Page Setup that will be used when scanning into this kind of job.
• Edit the job setup.
• Scan a page to use as a template for defining your bar code or OCR.
• Define where on the template image the bar code or OCR zone will be
found.
• Specify how a correct bar code or OCR value will be recognized.
• Set up the actions connected to that bar code or OCR zone (e.g., create a
new batch, create a new document in the current batch or populate one or
more index fields).
This chapter explains these steps, except for populating index fields.
Populating index fields can be found in Chapter 4,
Job Setup
.
