6-12
A-61635 December 2010
Bar Code Zone Setup
dialog box
Use this box to name your bar code zone
and describe how to recognize a
valid bar code for this zone, and specify any separation to be done by this bar
code.
Zone name
— enter the name for your new bar code zone. This name
identifies the bar code and appears in Index setup as BC_[zonename] in the
list of default values. The bar code Label does not define or identify a
Kodak
Capture Pro Software Index field.
Side: Front
or
Back
— select whether the bar code is located on the front or
back of an image.
Keep bar codes with mask
— use this option when one or more
Anywhere
bar code zones are defined. The bar code value is only retained for the defined
zone when it complies with the mask specified in the
Keep bar codes with
mask
field. This ensures that the bar code values read on a page are assigned
to the correct bar code zone.
This option is also useful when more than one bar code zone is in the same
physical location on a page but have different values and meanings (e.g., a
zone defined for a batch header sheet versus a zone defined for a document
header sheet). To comply with a specified mask, each character of the bar
code value must match the mask syntax for that character’s position in the
mask.
For example, a mask of
A<8>
will retain a bar code value of up to, but not
exceeding, eight alphabetic characters:
Bar Code Value Retained?
SURGERY Yes
ADMISSION No
if applicable, enter a mask value.
