A-61635 December 2010
4-7
General settings -
Capture tab
Select
General
on the Capture tab to make or change the following settings:
Scanned image location
— displays the current location where scanned
images will be stored for the selected job. If you do not want images scanned
into the displayed location, click
Browse
to select another location.
Output image location
— allows you to select the final destination for your
output images. If you do not want the images to go to the displayed location,
click
Browse
to select another location.
Description
— allows you to enter any important notes as a reminder of the
settings for this job setup.
Automatically close batch after scanning is finished
— if checked, closes
the batch in Batch Explorer and the Image Viewer when the scanner transport
stops.
Automatically output when batch is closed
— if checked, processes the
batch to output immediately after the batch is closed.
Keep batch after output
— if checked, saves the batch in the scanned image
location and also creates the output batch
.
