6-10
A-61635 December 2010
5. Position the original in the feeder and click
Start/Scan
. The image will be
displayed in the dialog box. Scan the image as straight as possible. Your
scanner will use the parameters of the current
Kodak
Capture Pro
Software page setup.
NOTES:
• Any auto-rotation, auto-cropping and deskew settings from the current
template will also be applied to the scanned image before it appears.
• If the image is acceptable, enter a name in the
Image Name
field. The
image name should not contain any of the following special characters:
: “? * . < > \ /
.
• To discard the image, click
Cancel
.
6. Click
OK
to save the image.
NOTES:
• Before you can define a bar code, you must save at least one image in the
Image
drop-down list.
• You can also transfer an image from the Image Viewer to the Bar Code
window. See the section entitled, “Transferring an image to the Bar Code
window” later in this chapter.
