178
JOHNSON CONTROLS
5276178-JIM-C-0118
User Interface Control Center
PRINTER
The Unit Control has the capability of being connected
though the RS-232 serial port, Port 2, to a computer
using Hyper Terminal. A NUL MODEM cable must be
used to connect the computer to the Unit Control.
Set Up
The computer must be connected to Port 2 of the Unit
Controller. Use the SERVICE key to verify that Port
2 is configured to “TERMINAL”.
Press the PRINT key on the key pad. Use the down
arrow key to set the following:
•
PRINTER BAUD RATE
•
PRINTER PARITY
•
PRINTER STOP BITS
•
PRINTER ROWS PER PAGE
These parameters must be set identical to the settings
in Hyper Terminal. In addition the data bits must be set
to 8 and Flow Control to None.
To use Hyper Terminal to save a report to a file:
•
Select “Transfer – Transfer Text” and enter a file
name to save the report in.
•
From the Unit Control panel, select the report
you want to print.
See Report Section below to
select the report.
•
As the report is uploading, from the Unit Control
to the PC, it is displayed in the Hyper Terminal
window.
•
When the reports finish transferring to the file,
select “Transfer – Capture Text – Stop”.
•
The file can then be printed from an application
like Notepad or Word.
To use Hyper Terminal to print a report without saving
it to a file:
•
Select “Transfer – Capture to Printer”.
•
From the Unit Control panel, select the report
you want to print.
See Report Section below to
select the report.
•
As the report is uploading, from the Unit Control
to the PC, it is displayed in the Hyper Terminal
window.
•
After the reports finish transferring to the PC,
select “Transfer – Capture to Printer” to send the
last page to the printer.
Report Section
Press the PRINT key and enter the password. Press the
CHECK key. Use the left or right arrow key to navigate
through the menu. The following reports are available
to be printed:
•
STATUS
•
UNIT DATA
•
COOLING
•
COMP SYSTEM
•
SUPPLY SYSTEM
•
HEATING
•
ECONOMIZER
•
VENTILATION
•
EXHAUST
•
SETPOINTS
•
PROGRAM
•
OPTIONS
•
DATE / TIME
•
SCHEDULE
•
HOURS / STARTS
•
SERVICE
•
HISTORY BUFFER 1
•
HISTORY BUFFER 2
•
HISTORY BUFFER 3
•
HISTORY BUFFER 4
•
HISTORY BUFFER 5
•
HISTORY BUFFER 6
•
HISTORY BUFFER 7
•
HISTORY BUFFER 8
•
HISTORY BUFFER 9
•
HISTORY BUFFER 10
•
RUN TEST
•
PRINT ALL REPORTS
After you have selected the report you want to print press
the check key to output the report to the computer.
Summary of Contents for 40 25 TON
