Johnson Controls 40 25 TON, Installation Operation & Maintenance

Page: 176 / 251

176
JOHNSON CONTROLS
5276178-JIM-C-0118
User Interface Control Center
Follow the instructions given in the “Data Entry Keys”
section to change the above values.
SCHEDULE
The “clock schedule” function can be USER ENABLED
/ USER DISABLED by using the schedule screen
below.
To set the schedule, press the SCHEDULE key. The
display will show the following message:
To change the start or stop time, press the

key. The
line under the 0 is the cursor. If the start time is wrong,
it may be changed from the numeric keypad. Once the
correct value (hour and minute) is entered, press the

key. The cursor will then move to the AM/PM selection.
This value may be chosen by the +/- key and entered by
pressing the

key. This process may be followed until
the hour, minutes, and meridian of both the START and
STOP points are set. Press the ▼ key to get the schedule
for the next day to appear. The start and stop time of each
day may be programmed differently. If you want to view
the schedule without making a change, simply press the
▼ key until the day you wish to view appears. The ▲
key will scroll backwards to the previous screen.
After the SUN (Sunday) schedule appears on the display
a subsequent press of the ▼ key will display the Holiday
schedule. This is a two-part display. The first reads:
The times may be set using the same procedure as
described above for the days of the week.
Continue pressing the ▼ key to set the 15 holiday dates.
The display will read:
The month and the day of each holiday are entered in
this format. Enter 0000 to not specify a holiday. The
MMDD is displayed when the value is being edited to
remind the operator what the format of this number is.
Eg. 1225 represents December 25.
CLOCK FRI 18 JUN 2004 10:15:33 AM
MINUTE =XX
CLOCK FRI 18 JUN 2004 10:15:33 AM
12 HOUR PERIOD =XX
CLOCK FRI 18 JUN 2004 10:15:33 AM
TIME FORMAT =XXXXXXX
SCHEDULE FRI

TO EDIT
START =06:00 AM STOP =10:00 PM
SCHEDULE SAT

TO EDIT
START =06:00 AM STOP =10:00 PM
SCHEDULE SUN

TO EDIT
START =06:00 AM STOP =10:00 PM
SCHEDULE HOL
START =06:00 AM STOP =10:00 PM
SCHEDULE MMDD
HOLIDAY 01 = 1225
CLOCK FRI 18 JUN 2001 10:15:33 AM
POWER OFF TIME =XXXXX
SCHEDULE MON

TO EDIT
+START =06:00 AM STOP =10:00 PM
SCHEDULE TUE

TO EDIT
START =06:00 AM STOP =10:00 PM
SCHEDULE WED

TO EDIT
START =06:00 AM STOP =10:00 PM
SCHEDULE THU

TO EDIT
START =06:00 AM STOP =10:00 PM
SCHEDULE

TO EDIT
OCCUPANCY SCHEDULE USER ENABLED
CLOCK FRI 18 JUN 2004 10:15:33 AM
DAY OF WEEK =XXX
CLOCK FRI 18 JUN 2004 10:15:33 AM
YEAR =XXXX
CLOCK FRI 18 JUN 2004 10:15:33 AM
HOUR =XX