JANOME Embroidery Software Instruction Book
Chapter 9 Outline & Fill Stitches
71
6
Click
OK
to apply.
Creating stemstitch outlines
Stemstitch is a detail stitch and
can be used to
mimic hand-sewn embroidery. It is used for stems
and vines with other decorative stitches, or as an
outline for Satin or Motif fills.
To create a stemstitch outline
1
Click the
Stemstitch
icon and digitize a stemstitch
outline as you would a run stitch outline. See
Digitizing
lines
for details.
2
Double-click to access
object details
.
3
If not already applied, select
Stem Stitch Line
from the
Stitch Type
list.
4
Adjust the
Line Thickness
as required.
5
Adjust the
Spacing
as required.
6
Adjust
Angle
and
Stitch Thickness
settings as
required.
7
Click
OK
to apply.
Creating candlewick outlines
Candlewicking is a traditional white-on-white
embroidery technique, usually done on white linen
or cotton fabric with heavy cotton threads. Stitches
used are mostly knots.
To create a candlewick outline
1
Click the
Candlewicking
icon and digitize a
candlewick outline as you would a run stitch outline.
See
Digitizing lines
for details.
2
Double-click to access
object details
.
Use Digitize > Stemstitch to digitize stemstitch
outlines.
Overlap: 30%
Overlap: 70%
Use Digitize > Candlewicking to digitize
candlewicking outlines.
Line Thickness:
2.0 mm
Line Thickness:
1.0 mm
Spacing:
0.8 mm
Spacing:
1.5 mm
Summary of Contents for Digitizer MB
Page 236: ...234 Part IX Software Feature Table...
