JANOME Embroidery Software Instruction Book
Chapter 27 Design Gallery Basics
228
To reconnect Design Gallery with EasyDesign
1
Check that your dongle security device is connected.
2
Open Design Gallery and check that it runs correctly
on its own – close Design Gallery, then open
EasyDesign by clicking its icon on the Windows
Desktop.
3
If none of the above correct the problem, re-install
EasyDesign.
4
Check that the version of EasyDesign you are running
is the same as that registered in Design Gallery
Shortcut Properties
:
Right-click the Design Gallery icon on your Windows
Desktop, then select
Properties
.
The
Design Gallery Properties
dialog opens.
Click the
Shortcut
tab, and read the last text in the
Target
field – e.g. version0.1D.
This version should be identical to the version of
EasyDesign you are running. If it is
not
, change it to
the correct version and click
OK
.
5
Install EasyDesign again.
shortcut
Summary of Contents for Digitizer MB
Page 236: ...234 Part IX Software Feature Table...
