JANOME Embroidery Software Instruction Book
Chapter 26 Outputting to Machine
215
Writing multiple designs to USB stick
The procedure for writing multiple designs to Flash
Memory reader/writer is essentially the same as
sending multiple design files to machine except
that you select External Media > Write Designs,
Read and Erase. See
Sending multiple designs to
machine
for details.
Outputting to MB-4 machine
If you are using MB-4 machine as your current
machine, the direct machine connection option is
available to you. This means you can send
individual or multiple design files directly to built-in
machine memory of your MB-4 machine.
Try this! Alternatively, you can use an external
‘Flash Memory’ (ATA PC) reader/writer to write
designs in JEF format directly to card. See
Writing
to Flash Memory reader/writer
for details.
Sending the current design to machine
When sending the current design to machine, you
can send the design file directly to the built-in
machine memory of your MB-4 machine.
Note The procedure for sending a single design to
machine is a little different to sending multiple
designs. See also
Sending multiple designs to
machine
.
To send the current design to machine
1
Open or create the design you want to send.
Note
This assumes you have MB-4 machine as your
current machine.
2
Click the
Send to Machine
icon or select
Machine >
Send Current Design
.
If the machine is correctly linked, the
Send Current
Design
dialog opens.
Note
The machine itself must be in PC-Link Mode in
order to receive the design.
3
Choose the destination machine.
4
Click
Change Name
if you need to send the design
under a different name.
5
Click
Change No.
if you want to change the design’s
ranking in the destination list – e.g. #1 to move it to the
top of the list.
Use Standard > Send to Machine to send the
current design to a machine for stitching.
Select files to
write
Use buttons to
navigate folders of
display file list
Select source
folder on your PC
Click to send
design to
machine
Click to change
name of output
file
Current design
Choose machine
Enter new name
Summary of Contents for Digitizer MB
Page 236: ...234 Part IX Software Feature Table...
