46
Chapter 7
Grids and Hoops
Hoops are required to hold the fabric tight while stitching on your machine.
They are available in different sizes. JANOME Embroidery Software allows you
to select from a wide range of standard factory-supplied hoops. If you have a
hoop which does not appear in the list, you can define a custom hoop from
scratch or based on a standard hoop. A representation of the selected hoop
providing a guideline for sizing and positioning your design is displayed in the
Design Window.
This section describes how to set grid spacing in JANOME Embroidery Software.
It also covers changing hoops and defining your own custom hoops. It explains
splitting designs on an MA Hoop when sending to machine as well as changing
hoop backgrounds.
Summary of Contents for Digitizer MB
Page 236: ...234 Part IX Software Feature Table...
