JANOME Embroidery Software Instruction Book
Chapter 19 Advanced Digitizing Techniques
153
7
Select an appliqué ‘style’:
Pre-cut
: Placement lines, tackdown and cover
stitches are generated.
Trim in Place
: In addition, a cutting line is generated.
Note
If you choose to generate a cutting line, place the
fabric patch after the placement line has been stitched,
then trim in position after the cutting line has been
stitched.
8
Use the
Inside
and
Outside
percentage settings to
adjust the cover stitch and tackdown offset.
For Satin stitch, the cover stitch and tackdown are
offset against the placement line using the slider. The
offset can be inside or outside the appliqué boundary.
For Blanket stitch, the offset is always 100% inside.
9
Click
OK
.
E-Stitch Width: 2.5 mm
E-Stitch Width: 1.5 mm
Satin Width: 1.0 mm
Satin Width: 2.5 mm
Satin cover stitch
Zigzag tackdown
Placement line
Offset: inside
Offset: outside
Offset: none
Summary of Contents for Digitizer MB
Page 236: ...234 Part IX Software Feature Table...
